概述：

强制精环蒸发结品器又称FC(Forced Circuation)型结品器。是一种可以连续生产的通用型结品设备，广泛成用于化工、轻工、运药等行业的生产以及环保行业废水蒸发结品处理。根据料渡性质的不同，FC型结品器分为加执蒸发型、间壁冷却型或真空冷却型等以满足各种结品工艺的需要。强制循环蒸发结品器是由加热器对待处理的料流进行加热进入结晶分离室蒸发分离，溶液达到过饱和状态便产生结品现象，由强制估环泵经多次循环加热后结品室内过饱和溶液沉浸在悬浮品粒表面上，使是体逐渐长大，当易体教量达到一定浓度时即可将品奖排出另作处理。强制循环蒸发结品器具有生产能力大，产品的粒度分布较宽，约在0.8-4mm的范围，适应各种物料的结品等特点。

Forced Circulation evaporation crystallizer is also called the FC(Forced Circulation) type of crystallizer can is a kind of continuous production of general-purpose crystalfization equipmentwidely used in the production of chemical industry,light industry. medicine and other industries as well as the evironmental protection industry waste water evaporation crystallization process According to the properties of matena liquid, FC fype crystallizer is divided into heating evaporation typecooling type or vacuum cooling tvoe partition, etc. So as to meet the needs of all kinds of crystallization process. Forced circulation evaporation crystallizer is by the heater heat treatment o matenal liquid into the crystallzation secaration chamber evaporation separation, achieve oversaturated solution crystallization phonomonon accurs, by repeated cyclic heating after the crystallization by forced circulation pump indoor immersed in a supersaturated solution suspended grain on the surinco, make the crystal grew up gradually, while the number of crvstal reaches a certain concentration of the crystal stumy discharge can be further processing.Forced circulation evaporation crystallization equpment has a large production capacity. product partide size distribution is wide, about the range of 0.8 to4 mm to adapt to the crstalization of  variety of materials, etc.

应用：

用于高浓缩、高粘度，含不溶性因形物等物料进行蒸发浓缩结晶。
Used for evaporation, concentration and crystallization of materials with high concentration, high viscosity and insolublo solids.

特点
Features
1、全套系统设计合理美观、运行稳定、低耗节能，蒸汽耗量低;
2、浓缩比大，强制备环式，使粘度较大的料液容易流动蒸发，浓缩时间短:
3、特殊设计经简单操作可实现切换，以适应不同产品的生产:
4、蒸发混度低 热量得到充分利用料流受热温和，适用于热敏性物料的浓缩
5、愿发曝调讨强制活环，在管内受热均匀，传热系做亮，可防止干键现像:
6、料液进入分离器再分离,强化了分离效果，使整体设备具有较大的操作弹性;
7、连续进出料，料液液位与所需浓度可实现自控;
8、太系续在蒸发后期采用强制活环的蒸发工艺，物料在接执管内的流速达到1.5~2m/s，在这种流速下不易发生者管理象，能够有效的防止诸管现象的发生。
9、系统稳定运行摩较高，一个基发装置要想稳定的运行，与一个良好的工艺是分不开的，设备之间的匹配以及选用合理的控制点能保证设备的稳定运行，我公司在三效蒸发器的设备设计方面以及整套工艺中的控制点的选取有独特的设计理念以及经验。因此能保证设备的稳定运行。
1.The whole system has reasonable and beautiful design stable operation, low eneray consumption and low steam consumption;
2.The concentration ratio is large, and it is forced to circulate, so that the feed liquid with high viscosity is easy to flowand evaporate and the concentration time is short
3. The special design can be switched by simple operation to adapt to the production of different products;
4 The evaporation temperature is low, the heat is fully utifzed, and the feed liquid is moderately heated, which is suitable for the concentration of heat-sensitive materia s;
5.The evaporator is heated evenly in the tube by forced circulationand the heat transfer coefficient is high,which can prevent the dry wall phenomenon;
6.The feed liquid enters the separator to be separated again, which strengthens the soparation effect and makes tho whole equipment have greater operational flexibility:
7.Continuous feeding and discharaing, the feed liguid level and the reguired concentration can be automatically controlled;
8. In the later stage of evaporation,this system adopts forced circulation evaporation process.and the flow rate of materials in the heat exchange tube reaches 1.5~2m/s,so it is not easy to block the tube at this fow rate,which can effectively prevent the tube from blocking.
9. The system has a high degree of stable operation.If an evaporation device wants to run stably, it is inseparable from a good process, The matching between devices and the selection of reasonable control points can ensure the stable operation of the equipment. Our company has a unique design concept and experience in the eguipment desian of the tripe-effect evaporator and the selection of control points in the whote process. so it can ensure the stable operation of the equipment.

技术参数：